Curb Appeal
If you had a custom sign made, you want it to always look its best. Spring is a good time to walk across the street from your sign and see if it adds to the curb appeal. If there are some tweaks to be made be sure to give us a call.
What To Check When Evaluating Your Custom Sign
-
Damage – Whether it be ice damage, wind damage, sun damage (fading) or vandalism, if your sign has been damaged in any way it is best to get it fixed before further damage occurs.
-
Repair – If your lit sign has burnt out bulbs or malfunctioning LEDs then it is not serving it purpose to its full capacity. If you wood sign is showing checks (splits in the wood) then it requires immediate repair.
-
Surroundings – Has the area where your sign has been place changed at all, example new buildings added or a new landscaping design. This could hinder your sign’s ability to stand out from its surroundings. This may be a good time to think about rebranding if you decide a new sign is in order.
How To Keep Your Custom Sign In Great Condition
By following these simple steps you can extend the life of your sign.
If you have a plastic/acrylic blade sign
Give it a once over with some window cleaner or mild soap and water to remove any debris. If it is lit have an electrician remove the sign from its casing first.
If you have a dimensional HDU foam sign
A light blasting from an air hose should blow off any dust buildup.
If you have a wood sign
- Twice a year wash and wax your sign. Use a mild dish soap and soft brissle brush (paint brush) to gently loosen surface dirt – follow with a though rinse with clean water. A light coat and buff with typical spray on car wax will help repell water and keep your sign looking good.
-
Remove any weeds or vines that are crawling up your cedar sign posts. They may look interesting, but they can do quiet a bit of damage to the finish
-
After about 7 years (depending on sun exposure) bring it into The Sign Depot workshop for refurbishing. It will leave looking brand new.
We also suggest refraining from using a power washer to clean any of your custom signs. The pressure could end up removing any paint or vinyl that is applied the to sign and could damage the sign material.
The post How To Spring Clean Your Exterior Custom Signs appeared first on The Sign Depot.